Random Signal Splitter

[BrusselSprouts693]

I'm sure this is ovibus to many of you, but I could not find this on TMEC. The function of this is to take one signal, and choose one of 2 different signals to activate. So, here that is!
Wire
(broken image link: https://steamcommunity.com/profiles/76561198162696855/screenshot/943970013060192749)

No wire
(broken image link: https://steamcommunity.com/profiles/76561198162696855/screenshot/943970013060193180)

Basically, the wire activates the dart and the faulty gate. The gate has a 50% chance of changing between the 2 signals. It they don't, it chooses one signal. If not, the other. You can also connect the contraption to other ones, to get it to 4 signals, 8, 16, 32, and other powers of 2. Tada!

 

[Lycos Hayes]

you do realize that the way the Faulty Logic Gate works with other lamps below it is that for each ON lamp vs Off Lamp determines the percentage chance of activation, yes? so you can essentially have it trigger as a 1 in 3, or x in y ratio based on how many are ON lamps vs how many lamps are in total between the Faulty and the Logic Gate.

 

[BrusselSprouts693]

you do realize that the way the Faulty Logic Gate works with other lamps below it is that for each ON lamp vs Off Lamp determines the percentage chance of activation, yes? so you can essentially have it trigger as a 1 in 3, or x in y ratio based on how many are ON lamps vs how many lamps are in total between the Faulty and the Logic Gate.

That would be a 1/3 change rate, not a 3 way split or a 2/3 chance on 1, so I can't really see a use.

 

[Lycos Hayes]

Another point to mention using your build:

Adding one additional module of this to one output will increment the possible results by 1, not 2, you'd have to attach both outputs of the first module to a secondary module to increment by 2. This way you can increment to exact amounts, growing exponentially with each full module chain.

 

[BrusselSprouts693]

I'm confused as to what you mean.

 

[BrusselSprouts693]

I have planned a concept for a 3 way splitter, but my computer charger is broken so I cannot share it with you all. I hope I can provide you all with this soon. If I can, I will edit this post with a screenshot.
Here it is!
Wire

No wire