• For issues you find with the Switch and Console releases, please follow this link and give as much detail as possible. This is the speediest way to get info to Pipeworks and get a hotfix in the works.
  • For issues you find with the Mobile 1.3 update, please follow this link and give as much detail as possible. This is the speediest way to get info to DR Studios to look at your issue. Also, some troubleshooting hints here.

Search results

  1. DicemanX

    [Showcase] Truffle Worm Autofarm: 390 Worms/hr + 50 Plat/hr (Bonus: Best Way to Farm Dev Armor)

    It might or might not work this way any longer, but when I designed the farm if the player character got far enough from the dummy ghost it would despawn the ghost. The "Off" switch was therefore teleporting to base, or exiting as r4v1n6 mentions.
  2. DicemanX

    Expert Mode Recursive Fully-Automated Lunar Event Autofarm

    I'm not sure if any of the updates made the playthrough more difficult, but even when I constructed the entire world there was a non-0 chance of failure at several junctures. First, as you discovered, it is possible to die at the moment the Moon Lord spawns in - the Moon Lord will spawn outside...
  3. DicemanX

    Expert Mode Recursive Fully-Automated Lunar Event Autofarm

    Yes they connect to the next arena. However, its been a while since I posted this farm and I haven't checked whether it still works properly after all the updates after 1.3.1. You might want to download the world and do some test runs there to make sure everything is working OK before building...
  4. DicemanX

    PC [Project] Mechmod - A T-MEC community mod

    So is mechmod still alive and well? I've been out of the loop for half a year, and now with 1.3.4 just being released, perhaps I'll get back to Terraria engineering :).
  5. DicemanX

    PC Binary to BCD Guide

    What you are describing is a single 1-to-n decoder that converts the entire binary number to BCD (which would be easy to construct but would be way too large), whereas I only presented a decoder that performs a -3 function (and can be modified to perform +3 functions as well). The plan is to use...
  6. DicemanX

    PC Binary to BCD Guide

    Very interesting approach! Given that Terraria's pulse-based system allows for a ton of flexibility, I'm sure we'll get a wide variety of constructions in due time. I actually decided on a much different approach that you might be interested in. I already built all the converters prior to 1.3.1...
  7. DicemanX

    The Ultimate Arena (AFK/non-AFK versus Moon Events, Invasions, All-Boss)

    Nicely done! It's really hard to get such a good time on mobile, so 12am final wave time is quite an impressive feat!
  8. DicemanX

    Perfect Faulty Gate - A selection of logic gates to cause multiple and/or random outcomes

    Pretty clever approach, taking advantage of our ability to manipulate probabilities in the starting randomizer by stacking lamps. This should work nicely for any randomizer in which all of the starting outcomes are allowed in subsequent trials, such as rolling a die. Also, kudos to the design...
  9. DicemanX

    PC [Question] How to selectively activate teleporters using logic gates and gem locks.

    Your teleporters are connected to each other and the switch, but not to the AND gate. Send the yellow wire from the AND gate box through both teleporters, and connect the switch with blue wire to the lamp at the very top. Remove the blue wires connecting the teleporters and the switch.
  10. DicemanX

    Perfect Faulty Gate - A selection of logic gates to cause multiple and/or random outcomes

    But it should be fun for the newer engineers to figure such things out! ;). Here's how I might build the delay: This is a randomizer that has three outputs that all have 1/3rd of a chance of activating. The 4th is sent into a 1-tick delay mechanism before sending the signal through the...
  11. DicemanX

    Perfect Faulty Gate - A selection of logic gates to cause multiple and/or random outcomes

    Well, trivial in the sense that we can easily create 1-tick delays using hoiktronics. There are a lot of posts on this already, especially by inomanoms :).
  12. DicemanX

    PC [Question] How to selectively activate teleporters using logic gates and gem locks.

    I added to my post before seeing your reply. You can add a single-lamp AND gate for the auto-shut off.
  13. DicemanX

    PC [Question] How to selectively activate teleporters using logic gates and gem locks.

    Add one more OFF lamp in the AND gate and connect it to your switch. That way you'll only be teleported if you hit the switch, and only if all the gem slots are full. If you want that lamp to automatically reset after you hit the switch, you pass that wire through an AND gate with a single lamp...
  14. DicemanX

    Perfect Faulty Gate - A selection of logic gates to cause multiple and/or random outcomes

    I'm planning on updating my blackjack machine by replacing the hoik-based randomizers with the faulty-lamp based randomizers. I will be using these: Each lever pull sends a signal through one of two paths. Here's what it looks like with 4 output lines: With such branching it's possible...
  15. DicemanX

    1.3.1 Another Approach to Ripple Carry Addition using only AND gates

    Right on! I was too fixated on keeping the AND gates in a column thus missing this nice way of compacing the build even more :). Here's what the set-up will look like when the switches are replaced with gates: The switches are still present because the adder isn't hooked up to anything yet...
  16. DicemanX

    1.3.1 Another Approach to Ripple Carry Addition using only AND gates

    Since we have some examples of ripple carry adders already (first from Yoraiz0r, and then a couple of others based on real world schematics), I decided to do this quick post showcasing another approach, avoiding the use of the 1.3.1 XOR gates completely and only simulating their function by...
  17. DicemanX

    1.3.1 Single Switch Reset Mechanism

    No worries, the gates are not always intuitive in how they function so we're all still learning how they work ;).
  18. DicemanX

    1.3.1 Single Switch Reset Mechanism

    The smoke can be entirely prevented by replacing the top row of lamps with faulty lamps. The reset will function in the exact same way. Check out ZeroGravitas's post in this thread, which shows how it can be done!
  19. DicemanX

    [Guide] Logic Gates: Order of Operations, Smoke and how to prevent it

    Thanks for this - it's very useful! I have particular interest in this, given what I just built and posted recently: The build in question is here: http://forums.terraria.org/index.php?threads/1-3-1-calculator-style-decimal-display-with-a-single-keypad.44028/ I ran into the exact same...
  20. DicemanX

    1.3.1 Calculator-Style Decimal Display With a Single Keypad

    Prior to 1.3.1 calculator-style displays were a huge pain to create, and they involved a massive number of dummy statues. In 1.3.1, the gates make it almost trivial to create, although the tough part is ensuring that the entire mechanism is compatible with other components (such as various...
Top Bottom