Batman67
Terrarian
This guide is an extension to the awesome work done by DicemanX in this thread.
I wanted to replicate the timer cascasdes as shown in his video, but did not want to use dummy ghosts or hoik tracks.
As I am not an engineer by education, this took multiple failed attempts as I learned through trial and error.
Auto-shutoff single pass timer cascade
I used six 1-second timers as shown in the original guide, but am employing a single faulty logic gate as the shutoff.
The red wires are the input/output and the blue/green wires alternate as per the original. When the last timer fires, it sends a signal to the faulty logic lamp via the green wire. This activates the faulty logic gate which sends a signal via the yellow wire back to the timer shutting down the cascade.
Cyclic Timer Cascade with shutoff
This timer was much more difficult to recreate. I failed multiple times until I essentially recreated exactly what DicemanX had created but replaced the actuated hoiks with faulty logic gates and the pressure plates with single lamp AND gates.
The wiring is convoluted so I'm showing two pictures; the first without the red wires and the second with all wiring.
In this picture, the yellow wire controls input/output and the blue/green wires alternate as per the original.
This picture adds the required red wires which prevents the switch from changing the state of the ON/OFF lamps.
I wanted to replicate the timer cascasdes as shown in his video, but did not want to use dummy ghosts or hoik tracks.
As I am not an engineer by education, this took multiple failed attempts as I learned through trial and error.
Auto-shutoff single pass timer cascade
I used six 1-second timers as shown in the original guide, but am employing a single faulty logic gate as the shutoff.
The red wires are the input/output and the blue/green wires alternate as per the original. When the last timer fires, it sends a signal to the faulty logic lamp via the green wire. This activates the faulty logic gate which sends a signal via the yellow wire back to the timer shutting down the cascade.
Cyclic Timer Cascade with shutoff
This timer was much more difficult to recreate. I failed multiple times until I essentially recreated exactly what DicemanX had created but replaced the actuated hoiks with faulty logic gates and the pressure plates with single lamp AND gates.
The wiring is convoluted so I'm showing two pictures; the first without the red wires and the second with all wiring.
In this picture, the yellow wire controls input/output and the blue/green wires alternate as per the original.
This picture adds the required red wires which prevents the switch from changing the state of the ON/OFF lamps.