The new absolutely stupid team system
- Thread starter SaaTq
- Start date
Travlordian01⚡️
Torch God
In the config file, there is a new setting for distant of how far you can see team, and it is automatically set to 2000 ft. So you have to change it in the config file.
Hi there @SaaTq, like Greybrynn helpfully pointed out, there is a setting in the config file where you can adjust the distance to show your team members. It was a simple question and a simple answer.
If you decide to stay and post in the future, I hope that you'll keep in mind that yelling in all caps isn't really necessary. Just a tip for going forward.@Greybrynn @Unit One I cant find it... This is my config file
#this is an example config file for TerrariaServer.exe
#use the command 'TerrariaServer.exe -config serverconfig.txt' to use this configuration or run start-server.bat
#please report crashes by emailing crashlog.txt to [email protected]
#the following is a list of available command line parameters:
#-config <config file> Specifies the configuration file to use.
#-port <port number> Specifies the port to listen on.
#-players <number> / -maxplayers <number> Sets the max number of players
#-pass <password> / -password <password> Sets the server password
#-world <world file> Load a world and automatically start the server.
#-autocreate <#> Creates a world if none is found in the path specified by -world. World size is specified by: 1(small), 2(medium), and 3(large).
#-banlist <path> Specifies the location of the banlist. Defaults to "banlist.txt" in the working directory.
#-worldname <world name> Sets the name of the world when using -autocreate.
#-secure Adds addition cheat protection to the server.
#-noupnp Disables automatic port forwarding
#-steam Enables Steam Support
#-lobby <friends> or <private> Allows friends to join the server or sets it to private if Steam is enabled
#-ip <ip address> Sets the IP address for the server to listen on
#-forcepriority <priority> Sets the process priority for this task. If this is used the "priority" setting below will be ignored.
#-disableannouncementbox Disables the text announcements Announcement Box makes when pulsed from wire.
#-announcementboxrange <number> Sets the announcement box text messaging range in pixels, -1 for serverwide announcements.
#-seed <seed> Specifies the world seed when using -autocreate
#remove the # in front of commands to enable them.
#Load a world and automatically start the server.
#world=C:\Users\YOUR_USERNAME_HERE\My Documents\My Games\Terraria\Worlds\world1.wld
#Creates a new world if none is found. World size is specified by: 1(small), 2(medium), and 3(large).
#autocreate=1
#Sets the world seed when using autocreate
#seed=AwesomeSeed
#Sets the name of the world when using autocreate
#worldname=Terraria
#Sets the difficulty of the world when using autocreate 0(classic), 1(expert), 2(master), 3(journey)
#difficulty=0
#Sets the max number of players allowed on a server. Value must be between 1 and 255
#maxplayers=8
#Set the port number
#port=7777
#Set the server password
#password=p@55w0rd
#Set the message of the day
#motd=Please don’t cut the purple trees!
#Sets the folder where world files will be stored
#worldpath=C:\Users\Defaults\My Documents\My Games\Terraria\Worlds\
#The location of the banlist. Defaults to "banlist.txt" in the working directory.
#banlist=banlist.txt
#Adds addition cheat protection.
#secure=1
#Sets the server language from its language code.
#English = en-US, German = de-DE, Italian = it-IT, French = fr-FR, Spanish = es-ES, Russian = ru-RU, Chinese = zh-Hans, Portuguese = pt-BR, Polish = pl-PL,
#language=en-US
#Automatically forward ports with uPNP
#upnp=1
#Reduces enemy skipping but increases bandwidth usage. The lower the number the less skipping will happen, but more data is sent. 0 is off.
#npcstream=60
#Default system priority 0:Realtime, 1:High, 2:AboveNormal, 3:Normal, 4:BelowNormal, 5:Idle
priority=1
#Reduces maximum liquids moving at the same time. If enabled may reduce lags but liquids may take longer to settle.
#slowliquids=1
#Journey mode power permissions for every individual power. 0: Locked for everyone, 1: Can only be changed by host, 2: Can be changed by everyone
#journeypermission_time_setfrozen=2
#journeypermission_time_setdawn=2
#journeypermission_time_setnoon=2
#journeypermission_time_setdusk=2
#journeypermission_time_setmidnight=2
#journeypermission_godmode=2
#journeypermission_wind_setstrength=2
#journeypermission_rain_setstrength=2
#journeypermission_time_setspeed=2
#journeypermission_rain_setfrozen=2
#journeypermission_wind_setfrozen=2
#journeypermission_increaseplacementrange=2
#journeypermission_setdifficulty=2
#journeypermission_biomespread_setfrozen=2
#journeypermission_setspawnrate=2
#this is an example config file for TerrariaServer.exe
#use the command 'TerrariaServer.exe -config serverconfig.txt' to use this configuration or run start-server.bat
#please report crashes by emailing crashlog.txt to [email protected]
#the following is a list of available command line parameters:
#-config <config file> Specifies the configuration file to use.
#-port <port number> Specifies the port to listen on.
#-players <number> / -maxplayers <number> Sets the max number of players
#-pass <password> / -password <password> Sets the server password
#-world <world file> Load a world and automatically start the server.
#-autocreate <#> Creates a world if none is found in the path specified by -world. World size is specified by: 1(small), 2(medium), and 3(large).
#-banlist <path> Specifies the location of the banlist. Defaults to "banlist.txt" in the working directory.
#-worldname <world name> Sets the name of the world when using -autocreate.
#-secure Adds addition cheat protection to the server.
#-noupnp Disables automatic port forwarding
#-steam Enables Steam Support
#-lobby <friends> or <private> Allows friends to join the server or sets it to private if Steam is enabled
#-ip <ip address> Sets the IP address for the server to listen on
#-forcepriority <priority> Sets the process priority for this task. If this is used the "priority" setting below will be ignored.
#-disableannouncementbox Disables the text announcements Announcement Box makes when pulsed from wire.
#-announcementboxrange <number> Sets the announcement box text messaging range in pixels, -1 for serverwide announcements.
#-seed <seed> Specifies the world seed when using -autocreate
#remove the # in front of commands to enable them.
#Load a world and automatically start the server.
#world=C:\Users\YOUR_USERNAME_HERE\My Documents\My Games\Terraria\Worlds\world1.wld
#Creates a new world if none is found. World size is specified by: 1(small), 2(medium), and 3(large).
#autocreate=1
#Sets the world seed when using autocreate
#seed=AwesomeSeed
#Sets the name of the world when using autocreate
#worldname=Terraria
#Sets the difficulty of the world when using autocreate 0(classic), 1(expert), 2(master), 3(journey)
#difficulty=0
#Sets the max number of players allowed on a server. Value must be between 1 and 255
#maxplayers=8
#Set the port number
#port=7777
#Set the server password
#password=p@55w0rd
#Set the message of the day
#motd=Please don’t cut the purple trees!
#Sets the folder where world files will be stored
#worldpath=C:\Users\Defaults\My Documents\My Games\Terraria\Worlds\
#The location of the banlist. Defaults to "banlist.txt" in the working directory.
#banlist=banlist.txt
#Adds addition cheat protection.
#secure=1
#Sets the server language from its language code.
#English = en-US, German = de-DE, Italian = it-IT, French = fr-FR, Spanish = es-ES, Russian = ru-RU, Chinese = zh-Hans, Portuguese = pt-BR, Polish = pl-PL,
#language=en-US
#Automatically forward ports with uPNP
#upnp=1
#Reduces enemy skipping but increases bandwidth usage. The lower the number the less skipping will happen, but more data is sent. 0 is off.
#npcstream=60
#Default system priority 0:Realtime, 1:High, 2:AboveNormal, 3:Normal, 4:BelowNormal, 5:Idle
priority=1
#Reduces maximum liquids moving at the same time. If enabled may reduce lags but liquids may take longer to settle.
#slowliquids=1
#Journey mode power permissions for every individual power. 0: Locked for everyone, 1: Can only be changed by host, 2: Can be changed by everyone
#journeypermission_time_setfrozen=2
#journeypermission_time_setdawn=2
#journeypermission_time_setnoon=2
#journeypermission_time_setdusk=2
#journeypermission_time_setmidnight=2
#journeypermission_godmode=2
#journeypermission_wind_setstrength=2
#journeypermission_rain_setstrength=2
#journeypermission_time_setspeed=2
#journeypermission_rain_setfrozen=2
#journeypermission_wind_setfrozen=2
#journeypermission_increaseplacementrange=2
#journeypermission_setdifficulty=2
#journeypermission_biomespread_setfrozen=2
#journeypermission_setspawnrate=2
doormatt 🌳🐿️
Official Terrarian
Don't modt programming programs have a find function?
Travlordian01⚡️
Torch God
Don’t know what you did to get to that, so can’t help you there sorry, I hope they add the change length in game to make it easier.